Abstract
This paper presents a developed design of a 3×4 circular polarization microstrip antenna patch array whose its resonance frequency is 2.45 GHz in the ISM band. This array is printed on a FR4 substrate of 1.58 mm thickness with a dielectric permittivity of 4.4. The basic antenna patch is a square shape inserted by a rectangular slot inclined positioned diagonally at the center to achieve circular polarization. In addition, a triangular-shaped slit is added at each of the four corners of the patch. The antenna array performance is tested numerically using two different software packages, CST MWS and HFSS. The antenna’s array size is compacted to a 22.7 cm×13.5 cm. The simulated results give good performance results in terms of return loss and gain; directivity is found to be 9.66 dBi at 2.45 GHz; the axial ratio value is 1.69 dB; and total efficiency is about 95.55% at 2.45 GHz. Then, the simulated results obtained by these two programs are in good agreement, which makes this proposed array design very suitable for radio frequency energy harvesting and its various applications to power supply different devices in a clean way for our environment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Indonesian Journal of Electrical Engineering and Computer Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.