Abstract
This paper reports a new MEMS vibratory rate gyroscope designed with increased robustness to fabrication imperfections and variations in environmental conditions. The distinct feature of the design is the increased response gain. The proposed architecture utilizes a single degree-of-freedom (DOF) drive-mode and a fully coupled 2-DOF sense-mode. The drive-mode operational frequency and the sense-mode bandwidth can be set independently, relaxing the tradeoff between the gain, die size, and detection capacitance, inherent to the previously reported robust gyroscopes with dynamic vibration absorber (DVA) architecture of the 2-DOF sense-mode. Prototypes with 2.5 kHz operational frequency were characterized in air and demonstrated sense-mode 3 dB bandwidth of 250 Hz. The uncompensated temperature coefficients of bias and scale factor were 313 °/h/°C and 351 ppm/°C, respectively. Using off-chip detection electronics, the rate sensitivity was 56 �� V/°/s, ARW – 0.09 °/s/•Hz, bias instability – 0.08 °/s, and
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.