Abstract
Josephson voltage standards utilize microwave-induced constant voltage steps occurring due to the ac Josephson effect. Existing standards can be considerably simplified and their accuracy improved by using a large number of series-connected Josephson tunnel junctions which are operated in the zero current step mode. For this purpose superconducting millimeter wave integrated circuits have been designed, fabricated, and tested. The circuits consist of a broadband taper between the rectangular waveguide and the planar structure, the Josephson junction series, a well-matched load, and dc pads. Circuits with various numbers of junctions have been fabricated by photo-lithographic techniques and tested at 4.2 K in liquid helium. The version with 1474 junctions produced voltages up to 1.2 V when operated at 90 GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Instrumentation and Measurement
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
