Nanocrystalline soft magnetic Fe-M-B (M = Zr, Hf, Nb) alloys and their applications

Abstract

This paper reviews our results on the development of a new type of soft magnetic material with high saturation magnetic flux density (Bs) above 1.5 T as well as excellent soft magnetic properties. A mostly single bcc structure composed of α-Fe grains with about 10–20 nm in size surrounded by a small amount of an intergranular amorphous layer was obtained by crystallization of amorphous alloys prepared by melt-spinning technique. The typical nanocrystalline bcc Fe 90Zr 7B 3, Fe 89Hf 7B 4 and Fe 84Nb 7B 9 ternary alloys subjected to the optimum annealing exhibit high Bs above 1.5 T as well as high effective permeability (μe) at 1 kHz above 20000. Excellent soft magnetic properties of the nanocrystalline Fe-M-B based alloys can be obtained by the decrease in the bcc grain size, magnetostriction (λ) and the increase in Tc of the intergranular amorphous phase by optimizing the crystallization process, chemical composition and adding small amounts of elements. For example, the improved FeZrNbBCu alloy shows the high ue of 160000 combined with the high Bs of 1,57 T. This excellent μe is comparable to those of nanocrystalline Fe 73.5Si 13.5B 9Nb 3Cu 1 and the zero-magnetostrictive Co based amorphous alloys, and the high Bs is comparable to those of the Fe based amorphous alloys with rather good soft magnetic properties. The excellent characteristics of a power transformer, a common mode choke coil, a pulse-transformer and a flux gate magnetic detector made of ‘NANOPERM ™’ were found in agreement with its very low core losses, sufficient thermal stability and low stress-sensibility of magnetic properties. The nanocrystalline Fe-M-B based alloys ‘NANOPERM ™’ is therefore expected to be used for many kinds of magnetic parts and devices.