单行小籽粒精少量播种机设计与试验

Abstract

In order to meet the precision seeding of small seeds including millet and broomcorn millet in hilly and mountainous areas, a single-row small grain precision seeder was developed. Static seeding test and seeding test were carried out on the seeder. In this paper, the key parts such as socket wheel-ring groove seed metering device, transmission system and tensioning wheel are designed. The working parts such as arrow shovel furrow opener, plastic seed tube and hollow cast iron press wheel were selected to achieve seed metering. The seed metering wheel has double-row of holes. The results of static seeding test showed that rotational speed had a significant effect on the sowing quantity of millet and broomcorn millet (P < 0.001). The higher the rotational speed, the greater the sowing quantity. With the increase of rotational speed of seed metering wheel, the damage rate of millet and broomcorn millet increased. At the same rotational speed, the breakage rate of broomcorn millet is smaller than that of millet. The field sowing test showed that when the seeder is at a marching speed of about 0.5 m/s, the qualified rate of the hole spacing of millet and broomcorn millet is greater than or equal to 90%, and the qualified rate of the number of grains per hole is greater than or equal to 82%. All indicators meet the requirements of the technical conditions of single-grain (precision) seeder. The design can provide reference for the design and optimization of small grain precision seeder.