光位置測定方式６自由度顎運動測定装置の開発と臨床応用の検討

Abstract

A jaw motion tracking device that measures six degrees of freedom has recently been developed. Understanding jaw motion is useful, but previous measurement methods were impractical for use in dental clinics. The overall aim of this study was to demonstrate the simple operation, low cost, and high precision of a recently developed jaw tracking device. In addition, this study explored its potential clinical applications. In this study, we compared two jaw motion tracking devices: a digital system type of device and an optical type of device. First we established a baseline occlusal plane from which to measure jaw motion in the same subject with both devices. The jaw motion signals were sampled at a frequency of 100 Hz. The subjects were three healthy women (mean age +/- SD = 26.3 +/- 1.2 years) who were recruited from among the crown-and-bridge faculty of Tsurumi University of Dentistry. The jaw motions measured were open-close movement, sagittal border movement, and frontal border movement. In addition, the kinematic axis point was calculated from the sagittal border movement. Data from the digital system type of device and data from the optical device were compared. The data were selected to measure rotation and translocation, i.e. jaw position about protrusion, both laterotrusion and maximal opening of the mouth. The root mean square (RMS) error of position measurement was 0.163 mm with MM-JI-E and 0.178 mm with the optical type of device. The RMS error of jaw motion measurement with the optical type of device was maximum at 0.8mm and minimum at 0.1mm. This was similar to that with digital system type of jaw motion tracking device. This study showed the possibility of developing clinical applications for this jaw motion device.