Abstract
We describe near optimum near field holography grating masks patterned by e-beam lithography and a distributed Bragg reflector (DBR) multiwavelength laser array fabricated using near field printing with this mask. Grating pitches in the array ranged from 242.861 to 243.750 nm in 0.127 nm steps. Data on the pitch precision and pitch adjustment is presented. Use of a conventional UV source rather than laser illumination both greatly simplified the printing process and eliminated coherent artifacts from the printed gratings. Chemically etched InP test gratings are shown to be extremely ‘‘clean’’ in appearance and low in edge roughness. DBR laser arrays designed with 100 GHz frequency separation were processed using the mask described. The measured frequency separation was 99 GHz which could be further adjusted with a tuning section of the four-section laser design. Characterization of a similar grating mask containing 16 wavelengths with similar pitch increments is also described.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
