Multiresidue pesticide analysis in tomato using GC-MS/MS using modified QuEChERS method with titanium-coated graphite with CNT-ABS nanocomposite as dispersive solid-phase extraction materials

Abstract

Abstract The presence of pesticide residues in food and vegetables is a growing concern for consumers. To monitor these residues reliably, a selective and sensitive multiresidue system has been developed and validated in tomato by gas chromatography–tandem mass spectrometry (GC-MS/MS). Titanium-coated graphite with carbon nanotube (CNT) in acrylonitrile–butadiene–styrene (ABS) used as reversed-dispersive solid-phase (extraction materials with modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) method. Titanium-coated graphite with CNT-ABS is synthesized, characterized by X-ray diffraction and scanning electron microscopy. The clean-up performance of titanium-coated graphite with CNT-ABS was demonstrated to be better to primary secondary amine and graphitized carbon black cartridges. The processing of two multiple reaction monitoring transformations for each analyte is done using GC-MS/MS in electron impact mode. Satisfactory purification and recovery effects (74%–100%) of 35 pesticides were achieved in tomato matrices when using 5 mg of titanium-coated graphite ABS-CNT nanocomposite. It was observed that quinolphos and deltamethrin are present above the maximum residue limit. The technique proved to be reliable and sensitive in tomato samples for the routine testing of 35 pesticides.