Abstract
The fabrication of eight-level reflective phase gratings in Si by electron-beam lithography and reactive ion etching, and focused ion-beam milling, has been investigated. Electron-beam lithography and reactive ion etching were used to fabricate gratings with 0.5-μm feature sizes. Alignment of successive levels was held to 50 nm by careful control of proximity effects. Focused ion-beam milling was used to fabricate continuously blazed surface reliefs. The effects of binary and continuously blazed surface reliefs on the first-order diffraction efficiency were determined. Eight-level binary reliefs produced efficiencies of 75% and were limited by phase errors while continuously blazed reliefs produced efficiencies of 90%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.