Abstract
The design of an ultrahigh-frequency (UHF) radio-frequency identification (RFID) reader antenna covering an electrically large near-field area is challenging for near-field UHF RFID applications. In such a design, magnetic field distribution on a large coverage area is required to be as uniform as possible. For some specific UHF near-field RFID applications, given radiation pattern characteristics are expected. A fragment-type wire structure is quite suitable for these demands because uniform magnetic field distribution and given patterns could be generated through optimizing the fragmented wires in a designated electrically large area to obtain corresponding current distribution. In this article, the concept of a fragment-type structure as well as some design guidelines are reviewed and summarized. Then, two omnidirectional fragment-type wire antennas with different cell size and two directional fragment-type wire antennas are designed. Both simulation and experiment results show that there is no reading null within an electrically large near-field zone having a perimeter of four operating wavelengths at 915 MHz (i.e., 320 mm x 320 mm). The omnidirectional designs are promising in the applications of UHF near-field RFID tag detection in self-confined volumes, and the directional designs are potential in the systems of UHF near-field/far-field RFID.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.