Abstract
A large-scale, real-world application of evolutionary multi-objective optimization is reported. The multidisciplinary design optimization among aerodynamics, structures, and aeroelasticity of the wing of a transonic regional-jet aircraft was performed using high-fidelity evaluation models. Euler and Navier-Stokes solvers were employed for aerodynamic evaluation. The commercial software NASTRAN was coupled with a computational fluid dynamics solver for the structural and aeroelastic evaluations. An adaptive range multi-objective genetic algorithm was employed as an optimizer. The objective functions were minimizations of block fuel and maximum takeoff weight in addition to drag divergence between transonic and subsonic flight conditions. As a result, nine nondominated solutions were generated and used for tradeoff analysis among three objectives. Moreover, all solutions evaluated during the evolution were analyzed using a self-organizing map as a data mining technique to extract key features of the design space. One of the key features found by data mining was the nongull wing geometry, although the present multidisciplinary design optimization results showed the inverted gull wings as nondominated solutions. When this knowledge was applied to one optimum solution, the resulting design was found to have better performance and to achieve 3.6% improvement in the block fuel compared to the original geometry designed in the conventional manner.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have