Multi-step kinetic mechanism coupled with CFD modeling of slow pyrolysis of biomass at different heating rates

Abstract

This study employed numerical modeling to investigate the reactivity and kinetics involved in the slow pyrolysis of lignocellulosic biomass. The model integrates a biomass multi-step kinetics scheme with heat, momentum, and mass transfer, and it was based on the transport of species and flow in a porous medium approach. To develop the multi-step kinetics model, two samples of biomass, avocado stone (AS) with a high hemicellulose content and α-cellulose (CEL), were subjected to TGA experiments in an inert atmosphere. Furthermore, several experimental data in the literature on the evolution of slow pyrolysis products and data obtained by TGA experiments were considered to refine and validate the proposed kinetic mechanism. The temperature range, from 25 to 700 °C, was explored using different heating rates (10, 20, and 40 °C/min). Experimental results showed that CO and CO2 are the predominant gases during primary devolatilization, whereas H2 and CH4 result from secondary reactions at temperatures above 400 °C. The proposed mechanism involves computational fluid dynamic (CFD) simulations of laboratory-scale biomass pyrolysis, comparing temperature and species concentrations with experimental data. The predicted results for individual non-condensable gas mass yields showed an average relative error of below 6.90 % and 11.59 % for CEL and AS, respectively. In the case of biochar, the error was 6.41 % and 9.74 % for AS and CEL, respectively. The developed kinetic model can be applied to simulate the slow pyrolytic degradation of biomass based on its chemical composition.