Abstract
With the rising cost of energy and the advancement of corporate social responsibility, there is a growing interest in addressing the challenge of recovering and storing high-temperature waste heat. Sensible heat storage in packed beds stands out as a cost-effective and seemingly straightforward solution for high-temperature Thermal Energy Storage (TES). Engineering models developed to design low-temperature TES systems were tentatively used to design this new generation of high-temperature systems. Delving into the physics of coupled heat and mass transfer reveals a lack of validation of this approach. This study seeks to establish a comprehensive bottom-up methodology - from the particle scale up to the system level - to provide informed and validated engineering models for the design of high-temperature TES systems. To achieve this goal, we developed a multi-scale numerical model to explore the physics of heat and momentum transfer in packed-bed TES systems. At the microscopic scale (pore/particle), we consider the flow of a compressible high-temperature gas between the particles, coupled to transient heat conduction within the particles, with particular attention given to incorporating accurate temperature-dependent viscosity for the gas phase and thermal conductivity and density for both solid and gas phases. At the macroscopic scale (engineering), we propose a high-temperature extension of state-of-the-art two-equation TES models. The governing equations considered are the volume-average conservation laws for gas-mass, gas-momentum and energy of both phases. The multi-scale strategy is applied to a randomly packed bed of spherical particles generated with the discrete element method (DEM) software LIGGGHTS. Numerical models for both scales were implemented in the Porous material Analysis Toolbox based on OpenFoam (PATO), which is made available in Open Source by NASA. Microscopic scale simulations were used to infer the effective parameters needed to inform the macroscopic model, namely, permeability, Forchheimer coefficient, effective thermal conductivities, and the heat transfer coefficient. The informed macroscopic model reproduces with excellent accuracy the average temperature fields of the physics-based microscopic model. Pore-scale analysis shows highly three-dimensional flow characterized by reverse flow and strong cross-flow in the packed bed system. Moreover, it indicates the coupling between temperature and velocity fields, where a nonuniform velocity field results in uneven temperature distributions across the fluid and the solid spheres within the packed bed, subsequently affecting the macroscopic heat transfer coefficient. The overall strategy is validated by comparison to available experimental data. This bottom-up methodology contributes to the understanding and opens new perspectives for a more precise design and monitoring of high-temperature TES systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have