Abstract
Nowadays, polymers frequently replace metals in several applications where comparable properties are desired due to the convenience of processing them as per the requirement. The present work intends to fabricate a thermoplastic polyurethane suitable for journal bearing application using fused deposition modelling (FDM) additive manufacturing method. The cylindrical samples were prepared for experiments using central composite design to examine the effect of FDM machine parameters (such as layer thickness, infill density, and printing speed) on response such as specific wear rate (SWR), coefficient of friction (COF) and hardness. Layer thickness was noticed to be the most significant parameter for the selected responses with a percentage contribution of ∼34% to 72%. Further, as observed from interaction plots the COF and SWR are lowest, and hardness is highest at highest infill density and lowest printing speed. To obtain an optimized set of FDM machine parameters for minimum SWR, COF and maximum hardness, genetic algorithm based multi-objective optimization is performed. The optimized values are SWR of 4.97 × 10−5 mm3/N-m, COF of 0.37 and hardness value of 37.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
