Abstract
This paper describes the development work of enabling a multi beam laser grooving technology for 40nm node low-k/ULK semiconductor device. A Nd:YAG ultraviolet (UV) laser diode operating at a wavelength of 355 nm was used in the study. The effects of multi beam laser micromachining parameters, i.e. laser power, laser frequency, feed speed, and defocus amount were investigated. The laser processed die samples were thoroughly inspected and characterized, which included the die edge and die sidewall grooving quality, the grooving shape/profile and the laser grooving depth examination. Die strength is important and critical. Die damage from thermal and ablation caused by the laser around the die peripheral weakens the mechanical strength within the die, causing a reduction in die strength. The strength of a laser grooved die was improved by optimizing the laser process parameter. High power optical microscopy, scanning electron microscopy (SEM), and focused ion beam (FIB) are the inspection tools/methods used in this study. Package reliability and stressing were carried out to confirm the robustness of the multi beam laser grooving process parameter and condition in a mass production environment. The dicing defects caused by the laser were validated by using failure analysis. The advantages and limitations of conventional single beam compared to multi beam laser grooving process were also discussed. It is shown that, multi beam laser grooving is possibly one of the best solutions to choose for dicing quality and throughput improvements for low-k/ULK wafer dicing. The multi beam laser process is a feasible, efficient, and cost effective process compared to the conventional single beam laser ablation process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.