Abstract
Micropattern Gaseous Detectors (MPGD), like Micromegas or GEM, are used or foreseen in particle physics experiments for which a very good spatial resolution is required. We have developed an experimental method to separate the contribution of the transverse diffusion and the multiplication process by varying the number of primary electrons generated by a point-like source. A pulsed nitrogen laser is focused by an optical setup on the drift electrode which is made of a thin metal layer deposited on a quartz lamina. The number of primary electrons can be adjusted from a few to several thousands on a spot whose transverse size is less than 100 μ m RMS. The detector can be positioned with an accuracy of 1 μ m by a motorized three-dimensional system. This method was applied to a small Micromegas detector with a gain set between 10 3 and 2 . 10 4 and an injection of 60–2000 photoelectrons. Spatial resolutions as small as 5 μ m were measured with 2000 primary electrons. An estimation of the upper limit of the relative gain variance can be obtained from the measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.