Abstract
Motion of break arcs driven by external magnetic field is observed using a high-speed camera. The magnetic field is applied with a permanent magnet. Experimental circuit is DC42 V-10A resistive circuit. Material of electrical contacts is silver. Following results are shown. The break arcs are driven in the direction according to Lorentz force. The arc duration decreases with decrease of the distance between the electrical contacts and the magnet. When the external magnetic-flux density at the position of the break arc is lower than a certain value, the effect of the magnetic field to drive the break arc becomes ineffective to shorten the arc duration. The result is explained with a relationship between the motion of break arc and the distribution of the external magnetic field.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.