Morphology and internal structure of a dormant landslide in a hilly area: The Collinabos landslide (Belgium )

Abstract

This study attempts to reconstruct the history of the Collinabos landslide, a landslide with a fresh morphology that is representative for more than 150 dormant, deep-seated (> 3 m) landslides in the Flemish Ardennes (Belgium). A geomorphological map was created based on LIDAR (Light Detection and Ranging)-derived maps and detailed field surveys. The map showed that the landslide consisted of three zones with significant differences in surface topography. The northern landslide zone 1 is characterised by at least five reverse slopes, whereas zones 2 and 3, the southern landslide zones, have only two reverse slopes and a convex foot. Electric resistivity profiles measured in zones 1 and 2 revealed that the differences in surface topography were not related to differences in internal structure as both parts of the landslide were initiated as a rotational earth slide with a surface of rupture at 15 m deep, where the displaced material broke apart in two blocks. However, two shear surfaces of reactivations within landslide debris were only distinguished in the accumulation area of zone 1. The observed differences in surface morphology can be caused by a temporary conversion of a forest into cropland in zone 2. It is suggested that reverse slopes of smaller reactivations within landslide debris were obliterated during the agricultural activities. AMS radiocarbon dating of organic material found in ponds located in reverse slopes generally resulted in relatively recent dates (i.e. 1400–1950 Cal AD) suggesting that several of the small local reactivations occurred in that period. One dating at 8700–8440 Cal BP of organic matter collected in a reverse slope in zone 1 suggests that an initiation under periglacial conditions cannot be excluded for the Collinabos landslide. By combining different technologies, this study provides valuable information for a better understanding of dormant landslides.