Abstract

Nanotendril “fuzz” will grow under He bombardment under tokamak-relevant conditions on tungsten plasma-facing materials in a magnetic fusion energy device. We have grown tungsten nanotendrils at low (50 eV) and high (12 keV) He bombardment energy, in the range 900–1000 °C, and characterized them using electron microscopy. Low energy tendrils are finer (~22 nm diameter) than high-energy tendrils (~176 nm diameter), and low-energy tendrils have a smoother surface than high-energy tendrils. Cavities were omnipresent and typically ~5–10 nm in size. Oxygen was present at tendril surfaces, but tendrils were all BCC tungsten metal. Electron diffraction measured tendril growth axes and grain boundary angle/axis pairs; no preferential growth axes or angle/axis pairs were observed, and low-energy fuzz grain boundaries tended to be high angle; high energy tendril grain boundaries were not observed. We speculate that the strong tendency to high-angle grain boundaries in the low-energy tendrils implies that as the tendrils twist or bend, strain must accumulate until nucleation of a grain boundary is favorable compared to further lattice rotation. The high-energy tendrils consisted of very large (>100 nm) grains compared to the tendril size, so the nature of the high energy irradiation must enable faster growth with less lattice rotation.

Highlights

  • The environment of a magnetic confinement fusion device, such as a tokamak, will be one of the most brutal ever envisioned by material engineers

  • We have grown W-nanofuzz at low (50 eV) and high (12 keV) He impingement energies, and used transmission and scanning electron microscopies to compare the structures of the tendrils themselves

  • The low-energy tendrils are far narrower than the high-energy tendrils, 22 ± 6 nm for the low-energy vs. 176 ± 15 nm for the high energy

Read more

Summary

Introduction

The environment of a magnetic confinement fusion device, such as a tokamak, will be one of the most brutal ever envisioned by material engineers. We have studied the microstructure of nanotendril mats, and isolated nanotendrils, grown under very different conditions, in order to characterize and quantify the similarities and differences in the tendrils’ structures. This quantitative experimental information will help validate and inform models and theory approaches as they simulate the growth of progressively more mature nanotendril structures. In these experiments, we have grown W-nanofuzz at low (50 eV) and high (12 keV) He impingement energies, and used transmission and scanning electron microscopies to compare the structures of the tendrils themselves

Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call