Abstract

PurposeUltra-high field magnetic resonance imaging poses a number of challenges for robust radio frequency coil designs. A monopole antenna array can potentially overcome key limitations of birdcage coil designs and may provide a useful radio frequency coil for brain imaging.MethodsFour, 8 and 12 element monopole antenna arrays were simulated using 3 T and 7T magnetic resonance imaging frequencies. For comparison, 4, 8 and 12 element birdcage coils were also simulated. Coil performance was evaluated and compared and the impact of shielding was assessed. A 4 element monopole antenna array was fabricated and bench tested.ResultsComparison of the 4, 8 and 12 element designs suggest that the monopole antenna array leads to better field properties than the birdcage coil in all configurations studied: unloaded, loaded with saline and loaded using a head phantom. Improvements in field properties and homogeneity were evident at both field strengths, implying that the monopole antenna array has potential for head imaging. The monopole antenna array also appears to be more efficient than the comparable birdcage coil design. Additionally, the former is scalable via the addition of more elements whereas our results suggest that this is not the case for the latter. Bench testing results show that the monopole antenna array is well matched with the transmission line, and mutual coupling between elements is sufficiently low.ConclusionWe found the monopole antenna array generated a larger field intensity than the birdcage coil design, whilst also producing a more useful magnetic resonance imaging field as measured by radio frequency field homogeneity. Our study suggests that magnetic resonance imaging of the brain can likely benefit from the use of radio frequency monopole antenna arrays.

Highlights

  • Radio frequency (RF) coils are an essential component of a magnetic resonance imaging (MRI) system

  • Comparison of the 4, 8 and 12 element designs suggest that the monopole antenna array leads to better field properties than the birdcage coil in all configurations studied: unloaded, loaded with saline and loaded using a head phantom

  • The monopole antenna array appears to be more efficient than the comparable birdcage coil design

Read more

Summary

Introduction

Radio frequency (RF) coils are an essential component of a magnetic resonance imaging (MRI) system. They are used for pulse transmission and signal detection, and can be tailored to optimise imaging of specific body parts [1, 2]. RF coils must be customised to specific frequencies and scanners as RF coils are made to transmit and receive time varying magnetic fields. These fields vary around the scanner Larmor frequency, as defined by the scanner field strength. Prominent designs include surface coils with a limited field-of-view but high sensitivity, volume coils such as the birdcage coil (BCC) with a comparatively large field-of-view but with decreased sensitivity, and transverse electromagnetic coils which are tailored to ultrahigh field applications

Objectives
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call