Monitoring of Thermal Runaway in Commercial Prismatic High-Energy Lithium-Ion Battery Cells via Internal Temperature Sensing

Abstract

The temperature of a lithium-ion battery is a crucial parameter for understanding the internal processes during various operating and failure scenarios, including thermal runaway. However, the internal temperature is comparatively higher than the surface temperature. This particularly affects cells with a large cross-section, which is due to heat development within the cell and lower heat dissipation due to a poorer ratio of volume to surface area. This paper presents an approach that enables real-time monitoring of the behavior of a commercial prismatic high-energy battery cell (NMC811/C, 95 Ah, Contemporary Amperex Technology Co., Limited (Ningde, China)) in the event of thermal runaway induced by overcharging. The internal cell temperature is investigated by the subsequent integration of two hard sensors between the two jelly rolls and additional sensors on the surface of the aluminum housing of the battery cell. The sensor’s signals show a significant increase in the temperature gradient between the temperature in the core of the cell and the cell casing surface until the onset of venting and thermal runaway of the battery. The data enable a detailed investigation of the behavior of the battery cell and the comparatively earlier detection of the point of no return in the event of thermal runaway.