Modified model of reduction condensing losses strategy into the wet steam flow considering efficient energy of steam turbine based on injection of nano-droplets

Abstract

In this study according to the challenges of the power generation industry and condensing losses of wet steam flow, the strategy of Nano-droplets injection in nucleation zone is used. The strategy as such have been adopted to reduce the condensing losses of the flow and increase the efficient energy of the steam turbine. In the first step, after performing the sensitivity analysis on the computational domain of the non-equilibrium condensation model, the results are validated with the experimental data. Also, the SST k-ω turbulence model is utilized to simulate the latency created by the presence of Nano-droplets in the created domain. In the second step, the measurement criterion for injection effects in different locations of the nucleation zone is defined as efficient energy. This energy for the steam turbine are calculated as the energy of flow between the cascade blade, which it has the lowest wet losses of liquid phase and the highest temperature, velocity and internal energy. Finally, based on the Modified case, the efficient energy parameters have been presented, which result in a decrease of approximately 45% 27.5%, 21.4% 44% and 18%, for the condensation losses, droplets radius size, liquid mass fraction, the erosion rate ratio and wetness losses, respectively. Additionally an increasing trend of 18.25% and 0.2% for the efficient energy and Mach number has been observed.