Abstract

The present study deals with the preparation of new composites in which L-proline (LP) and furnacrylic acid (FA) have been grafted on surface of amino functionalized silica nanoparticles (AFS). At first, AFS were prepared by sol-gel approach using tetraethoxysilane (TEOS) as silica source and aminopropyltriethoxysilane (APTES) as silica modifiers. Taking the advantage of amino group on AFS surface, LP and FA were easily grafted on silica surface to obtain LP grafted silica (AFS-LP) and FA grafted silica (AFS-FA) nanocomposites by post modification approach. As prepared composites were characterized by FTIR, SEM, XRD and TGA. The evidence of LP and FA on AFS was elucidated from the FTIR bands found at 1650–1698 cm−1 related to carbonyl group CO) of amide. Additionally, peaks observed at 2965 cm−1 (C-H stretching) of propyl groups and at 1050 cm−1 (Si-O-Si) indicated that the backbone of the material is preserved as silica. The micro images of SEM depicted that the AFS are spherical in shape and have more degree of monodispersivity whereas the SEM images of composites (AFS-LP and AFS-FA) have larger particle size and less degree of monodispersivity. Likewise, XRD peaks at 2θ (∼12°) revealed the mesoporosity of silica as well as hybrid silica and further depression in this peak in case of AFS-LP and AFS-FA depicted the existence of organic moieties on silica. TGA analysis depicted three decomposition steps (high weight loss) in case of AFS-LP and AFS-FA in contrast to two decomposition steps observed in case of AFS. The higher weight loss observed in the case of hybrid composites depicted the grafting of organic molecules on AFS. The prepared composites AFS-LP and AFS-FA were deployed to investigate their adsorption capacity to remove methyl orange (MO) from aqueous media. Experiments revealed that the composites have high adsorption capacity in acidic media (pH=2) with % removal of 85.05 % for AFS-LP and 81.70 % for AFS-FA. The experimental data was evaluated for adsorption isotherms and value of correlation factor (R2) was close to unity in case of Freundlich representing that the adsorption follows Freundlich isotherm. The data was also evaluated for kinetic models and higher values of R2 as well as closeness of experimental and calculated values of Qe predicted that adsorption of MO followed pseudo-second order kinetic model.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call