Abstract
Modern technologies for the construction of livestock rooms, inexpensive foundations, short construction time, low material capacity of the building, the possibility of using a leasing payment scheme are factors that will minimize construction costs. At much lower initial cost, frame and awning livestock rooms pay off much faster than capital buildings, with the construction of livestock rooms cost 3–5 times cheaper. The standard hangar designs are versatile and versatile. The form determines the amount of working space inside the hangar, depending on the purpose of the operation. Width standard up to 30 m. Length – proportional, step between arches 3 m. They are tent, arched and straight. Frame and awning hangars up to 1500 square meters, m. are considered to be high-speed mobile structures of temporary type. No permits are required for their construction. There is no need for the construction of the foundation, the involvement of large machinery. Despite the “temporary type”, metal construction is reliable. Construction is carried out according to the developed design standards – SP 384.1325800.2018. If necessary, the awning membrane can be easily and quickly repaired or replaced with a new one after 10–15 years. The most effective way to insulate a hangar today is to insulate it by spraying polyurethane foam. Depending on the technological scheme of installation of equipment of livestock premises, the required number, size and location of the farm gate is determined. The ends of the livestock premises are equipped with swing gates for the entry of transport, distributing feed to the feeding table, the gates can be awning or metal, sectional, recoil or swing. At the request of the customer can be designed passages for pushing. In order to reduce electricity consumption for heating purposes and to save money on electricity, we propose to equip the heating system of frame and awning hangars with another source of heat supply – a heat pump. To reduce electricity costs for heating radiators, it is necessary to install thermostatic valves at the rate of one valve per radiator. The electric power of the heat pump with a minimum conversion factor (KP) will be 12.5 kW. Electricity costs for circulation of such volume of a brine at resistance of 8 m make about 0,5 kW. Energy savings when using a heat pump in monetary terms at an electricity tariff of 193.28 kopecks. without VAT for 1 kW. year will be 59976 × 193.28 = 115.922 thousand UAH without VAT.
Highlights
The ends of the livestock premises are equipped with swing gates for the entry of transport, distributing feed to the feeding table, the gates can be awning or metal, sectional, recoil or swing
In order to reduce electricity consumption for heating purposes and to save money on electricity, we propose to equip the heating system of frame and awning hangars with another source of heat supply – a heat pump
Витрaти електроенергiї нa циркуляцiю тaкого обсягу розсолу при опорi 8 м склaдaють близько 0,5 кВт
Summary
Modern technologies for the construction of livestock rooms, inexpensive foundations, short construction time, low material capacity of the building, the possibility of using a leasing payment scheme are factors that will minimize construction costs. The standard hangar designs are versatile and versatile. Frame and awning hangars up to 1500 square meters. Construction is carried out according to the developed design standards – SP 384.1325800.2018. Depending on the technological scheme of installation of equipment of livestock premises, the required number, size and location of the farm gate is determined. In order to reduce electricity consumption for heating purposes and to save money on electricity, we propose to equip the heating system of frame and awning hangars with another source of heat supply – a heat pump.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.