Abstract

A 2-D numerical model for brittle creep and stress relaxation is proposed for the time-dependent brittle deformation of heterogeneous brittle rock under uniaxial loading conditions. The model accounts for material heterogeneity through a stochastic local failure stress field, and local material degradation using an exponential material softening law. Importantly, the model introduces the concept of a mesoscopic renormalization to capture the co-operative interaction between microcracks in the transition from distributed to localized damage. The model also describes the temporal and spatial evolution of acoustic emissions, including their size (energy released), in the medium during the progressive damage process. The model is first validated using previously published experimental data and is then used to simulate brittle creep and stress relaxation experiments. The model accurately reproduces the classic trimodal behaviour (primary, secondary and tertiary creep) seen in laboratory brittle creep (constant stress) experiments and the decelerating stress during laboratory stress relaxation (constant strain) experiments. Brittle creep simulations also show evidence of a critical level of damage before the onset of tertiary creep and the initial stages of localization can be seen as early as the start of the secondary creep phase, both of which have been previously observed in experiments. Stress relaxation simulations demonstrate that the total amount of stress relaxation increases when the level of constant axial strain increases, also corroborating with previously published experimental data. Our approach differs from previously adopted macroscopic approaches, based on constitutive laws, and microscopic approaches that focus on fracture propagation. The model shows that complex macroscopic time-dependent behaviour can be explained by the small-scale interaction of elements and material degradation. The fact that the simulations are able to capture a similar time-dependent response of heterogeneous brittle rocks to that seen in the laboratory implies that the model is appropriate to investigate the non-linear complicated time-dependent behaviour of heterogeneous brittle rocks.

Highlights

  • A detailed knowledge of time-dependent brittle deformation mechanisms, such as brittle creep and stress relaxation, is a vital prerequisite for understanding the longterm behaviour of the rocks found within the Earth’s upper crust (Karato & Li 1992; Wang et al 1994)

  • Deformation during laboratory brittle creep experiments is normally explained in terms of time-dependent, subcritical crack growth (Atkinson 1984)

  • Three regimes are usually observed during brittle creep experiments: primary creep or transient creep, secondary creep or steady-rate creep and tertiary or accelerating creep

Read more

Summary

INTRODUCTION

A detailed knowledge of time-dependent brittle deformation mechanisms, such as brittle creep ( known as static fatigue) and stress relaxation, is a vital prerequisite for understanding the longterm behaviour of the rocks found within the Earth’s upper crust (Karato & Li 1992; Wang et al 1994). Amitrano & Helmstetter (2006) proposed a finite element model based on static fatigue laws to model the timedependent damage and deformation of rocks under a constant stress They used an empirical relation between time-to-failure and the applied stress to simulate the behaviour of each element. Their model produces a power law distribution of damage event sizes, aspects of localization and the trimodal behaviour seen in experimental brittle creep curves. The model of Main (2000) has been applied to recent experimental data sets (Heap et al 2009a, 2011) In this manuscript, we present a time-dependent material softening model to simulate the time-dependent deformation of heterogeneous brittle rocks under constant uniaxial compressional loading. The modelling of the time-dependent behaviour of rock in triaxial loading and the extension of the model to coupled poromechanical behaviour will be the focus of future manuscripts

DESCRIPTION OF THE NUMERICAL MODEL
Time-independent model
Time-dependent model
Geometry of the modelled samples
Validation of the numerical model
Modelling of basic mechanical properties
Modelling of brittle creep behaviour
Modelling of relaxation behaviour
Findings
CONCLUSIONS
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call