Abstract
A mechanistic empirical (M–E) approach has been developed and thereafter used to calculate the rutting performance of an arterial road in Southern Sweden. The results were then compared with measurements from the Swedish long term pavement performance (LTPP) database. The arterial road had reached the critical 15mm rut after 18 years in operation. The M–E approach used is a two–step procedure where the response of the structure is calculated mechanistically and thereafter the performance predicted empirically based on scaling of laboratory test results. Extensive laboratory testing was carried out on samples taken from the test road. Traffic counting and Bridge Weigh–in–Motion (BWIM) data were used to determine the amount of traffic loading, and data from weather stations were used to take into account the temperature dependency of the asphalt bound layers. The analysis shows that the rutting development can be simulated adequately although the calculations show slower rate than the measurements towards the end of the simulated period. The discrepancy in the rate of rutting between the measurements and the observations that was observed after about 9 years of operation might be due to the fact that no ageing or disintegration in material characterization was incorporated in the numerical analysis but surely observed in reality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.