Abstract
ABSTRACT Modelling the effect of reaction time, catalyst concentration, and oil-to-methanol ratio on the waste cooking oil biodiesel was studied using response surface methodology. Biodiesel was made using three different heterogeneous catalysts. Analysis showed catalysts 2 and 3 to be significant in transesterification. However, all catalysts had second-degree significance for esterification yield. For catalysts 1 and 2 there was a clear interaction between catalyst concentration and oil-to-methanol ratio. Clear interaction was also noticed between reaction time and oil-to-methanol ratio for all catalysts. There was moderate to no interaction between the effects of time and catalyst concentrations for all catalysts. The best yield was found at lower oil-to-methanol ratios (nearly 0.02) and higher catalyst concentrations (at 10%). Reaction times close to 7 hours for catalyst 1 and close to 5 for the other catalysts were the optimum values for best yield and lowest acid value.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
