Modeling of thickness effect on the creep properties of Ni-based superalloys

Abstract

PurposeSpecimen thickness has great influences on the creep behavior of single crystal Ni-based superalloys when it is less than 3.0 mm, which is known as thickness debit effect. Experiments have detected that oxidation can influence the microstructure of the Ni-based superalloys. Here, a model is proposed to bring in both the oxidation effect and void caused damage to account for the thickness debit effect. The paper aims to discuss these issues.Design/methodology/approachThe model uses the simple Norton type creep relation to describe the creep rate evolution. The damage evolution caused by void is taken to be stress controlled. The load baring area changes are calculated with the consideration of oxidation and void evolutions.FindingsSimulations on specimens with different thickness from 3.0 to 0.3 mm are carried out. The results show that the present model can reproduce the decrease of the creep strength with the decreases of the specimen thickness. The damage plays a major role in the creep behavior of the thick specimen. Both the damage and the oxidation are important for the thin specimen which should be paid attention to during the calculation of the creep response of the thin-wall turbine blade.Originality/valueA model is proposed to account for the thickness debit effect on the creep behavior of Ni-based superalloys. Both oxidation influence and void caused damage are introduced. The simulation results show the capability of the model to reproduce the thickness debit effect.