Abstract
AbstractDuring deformation of an Al‐Mg alloy (AA5754) dynamic strain aging occurs in a certain range of temperatures and strainrates. An extreme manifestation of this phenomenon, usually referred to as the Portevin‐Le Chatelier (PLC) effect, consists in the occurrence of strain localisation bands accompanied with discontinuous yielding. The PLC effect stems from dynamic dislocation‐solute interactions and results in negative strain‐rate sensitivity of the flow stress. The PLC effect is detrimental to the surface quality of sheet metals and also affects the ductility of the material. Since the appearance of the effect strongly depends on the triaxiality of the stress state, three‐dimensional finite element simulations are necessary in order to optimize metal forming operations. We present a geometrically nonlinear material model which reproduces the main features of the PLC effect. The material parameters were identified based on experimental data from tensile tests. Special emphasis was put on the critical strain for the onset of PLC effect, ε c , and the statistical characteristics of the stress drop distribution. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call