Abstract
Experimental investigations on model pile groups of configuration, 1 × 1(single pile), 3 × 1, 2 × 2 for embedment length to diameter ratio, L/d = 38, were conducted in uniform dry medium dense Ennore sand. The spacing of piles in the groups varied from 3 to 6 pile diameter. Soil–pile friction angles were δ = 16° and 28°. The pile groups were subjected to oblique pulling loads at angles θ = 0°, 30°, 60° and 90° with the vertical central axis of the groups. The load–displacement response, oblique ultimate pulling resistances have been qualitatively and quantitatively studied. The inclinations of the load, at which maximum oblique resistance for the groups were observed, have been reported. Predictions of ultimate resistance of pile groups under uplift, lateral and oblique pulling loads have been carried out respectively by the methods of Patra and Pise (2002) (Electronic Journal of Geotechnical Engineering, 8, Bundle B), Patra and Pise (2001) (Journal of Geotechnical and Geoenvironmental Engineering ASCE, 127(6), 481–487) and Chattopadhyay and Pise (1986c) (Proceedings of IST East Asian Conference on Struct Engineering and Const., Vol. 1, pp. 1632–1641). A comparison of the measured values of the Writers and others with the predicted values showed reasonable agreement.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
