7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
https://doi.org/10.1364/ol.40.004022
Copy DOIJournal: Optics Letters | Publication Date: Aug 21, 2015 |
Citations: 18 |
Optically pumped InAs quantum dot microdisk lasers with grooves etched on their surface by a focused ion beam are studied. It is shown that the radial grooves, depending on their length, suppress the lasing of specific radial modes of the microdisk. Total suppression of all radial modes, except for the fundamental radial one, is also demonstrated. The comparison of laser spectra measured at 78 K before and after ion beam etching for a microdisk of 8 μm in diameter shows a sixfold increase of mode spacing, from 2.5 to 15.5 nm, without a significant decrease of the dominant mode quality factor. Numerical simulations are in good agreement with experimental results.
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.