Abstract
This paper describes experimental and numerical studies on the application of the End Notched Flexure (ENF) and End Loaded Split (ELS) tests to mode II wood fracture characterization. In this context, ENF and ELS specimens were used to determine GIIc of a clear Pinus pinaster wood in the RL system, which is the most relevant for structural design. In mode II fracture tests the crack faces are in contact, thus hindering a rigorous visualization of the crack tip. This makes classic methodologies based on crack length measurement during experimental tests inadequate, since they induce significant errors on the mode II fracture properties. To overcome this experimental problem a Compliance Based Beam Method (CBBM) is used. This new data reduction scheme does not require crack length monitoring and includes the effect of the Fracture Process Zone (FPZ) ahead of crack tip. Furthermore, the clamped cross-section rotation of the ELS specimen is also taken into account. In the present work a numerical analysis considering a cohesive damage model was performed with a cohesive damage model in order to validate the application of the CBBM to the experimental results. The results confirmed the adequacy of the CBBM and the applicability of the ENF and ELS tests for mode II wood fracture characterization.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
