Application of the effective crack length method to model delamination of unidirectional composite laminates under Mode II shear loadings

Abstract

Damage modelling of composite material delamination is an intense field of research to understand the complex composite failure behaviour and predict the residual strength of damaged structures. One of the widely employed methods to simulate delamination is the cohesive zone modelling (CZM) technique. To successfully utilize this approach, accurate characterisation of the interlaminar fracture toughness is crucial, while the composite delamination is dominated by Mode I and Mode II fracture in most cases. Numerous studies have been conducted on composite materials delamination under Mode I loadings using double cantilever beam (DCB) tests. Accordingly, the ASTM standard testing procedure and data reduction scheme to obtain Mode I fracture toughness (GIc) have been well established and widely accepted. However, it is still challenging to characterize the composite Mode II delamination resistance due to the susceptibility problems inherent to the existing testing methods and the lack of robust data reduction schemes to accurately identify the initial crack tip and monitor the crack growth. This study attempts to find a reliable solution to obtain the Mode II fracture toughness (GIIC) and an effective modelling strategy to simulate Mode II delamination in laminated composites. First, we reviewed the existing testing set-ups and surveyed the data reduction schemes conventionally used to obtain GIIC. The advantages and drawbacks of the three most used test methods, and particularly the standard end-notched flexure (ENF) test (ASTM D7905/D7905M) and the end-loaded split (ELS) test (ISO 15114:2014) were examined. Second, the advantages of the effective-crack-length-based data reduction schemes against the classical data reduction schemes were empirically studied with the ENF tests conducted on G40-800/5276-1 carbon-fibre reinforced composite laminate coupons. Although many studies have studied the accuracy of the effective-crack-length-based approaches from different aspects, there is a lack of direct comparison between the numerical results and experimental data. Our modelling study demonstrates that among the five data reduction schemes that are examined, the compliance calibration method (CCM) required by ASTM D7905 yields the most conservative GIIC values, which is suitable for establishing material property for a design purpose. The compliance-based beam method (CBBM) may generate the least conservative GIIC values, which are deemed to be the most accurate ones for modelling and simulation validation purposes. Finite element (FE) modelling of the ENF tests using the CZM technique was carried out and comprehensive parametric studies were conducted to achieve an efficient and robust strategy for delamination modelling of composite laminates under Mode II shear loadings.