Abstract
Continuous carbon fibres can greatly improve the properties of 3D-printed polymer parts made by material extrusion. However, like all laminated composites, 3D-printed parts are susceptible to delamination damage. In addition, the printing process does not include a consolidation at high temperatures and pressure, unlike conventional manufacturing methods, which can lead to poor interlayer cohesion. Due to the combination of the susceptibility to delamination and a weak interface, the assessment of the interlaminar properties of 3D-printed parts is critical. This work experimentally investigates the delamination behaviour of carbon fibre-reinforced polyamide laminates under mode I, mode II and mixed mode I-II loading, using the double cantilever beam (DCB), end-loaded split (ELS), end-notched flexure (ENF) and mixed-mode bending (MMB) tests. An interlaminar fracture toughness at crack initiation of 1.5 kJ/m2 was found in mode I, 2.1 (ELS) and 1.8 (ENF) kJ/m2 in mode II, and 1.0 kJ/m2 in mixed mode I-II with GII/Gtotal = 0.5. Several analytical and numerical models are employed to validate the experimental results. Scanning electron microscopy revealed the micro-mechanical origins of the crack in the different loading configurations.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Composites Part A: Applied Science and Manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
