Mode for hot air drying of alder blanks that retain the colour acquired during the steaming process

Abstract

Mode for hot air drying of alder blanks that retain the colour acquired during the steaming process. The paper presents a hot-air mode for drying steamed alder in the form of blanks with dimensions: 38x100x800 mm from the initial moisture content W1 ≈ 50 % to the final moisture content W2 = 10%, while maintaining the colour of wood obtained in the process of steaming with saturated water steam. The drying process is divided into two parts: (I) evaporation of free water from wet wood at drying medium temperatures td = 35 - 40 °C and relative air humidity φ = 70 – 60%, when there are no chemical changes in the lignin-saccharide complex of alder wood manifested by a change in colour; (II) evaporation of bound water from alder wood below the hygroscopicity limit is performed at temperatures td = 60 - 80 °C. The color coordinates of steamed alder wood after drying by a given mode in the CIE L* a* b* colour space are: L* = 62.5 ± 1.7; a* = 13.1 ± 0.8; b* = 18.5 ± 0.9. Total colour difference ∆E = 1.6. According to the categorization of wood color changes in thermal processes of wood , this change belongs to small (insignificant) color changes.