Abstract
This article describes the simulation and experimental determination of the oscillation modes of a Coriolis Mass Flowmeter (CMF). The authors use the SolidWorks software to create a suitable model which is a double U-type of CMF. Based on SolidWorks software, the authors established the double-U tube model for CMF, adopted ANSYS-Workbench simulation software to make the modal analysis, and the exciting mode and Coriolis force mode of CMF are obtained by simulation. According to the results of modal analysis, the authors made the harmonic response analysis of the Flowmeter, got the displacement amplitude of the U-shaped tube excited by different frequency loads under the exciting force, and the maximum displacement amplitude at the resonant frequency was determined. Next, the authors use a laser vibrometer to perform an experimental modal test on the flowmeter. The result of the simulation of the finite element model was verified by modal test of the flowmeter. Provides an effective reference for CMF modelling and simulation in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
