Mobility of heavy metals in harbour sediments: an environmental aspect for the reuse of contaminated dredged sediments

Abstract

Different methods to determine the source strength of two harbour sediment fractions were applied and are discussed with a focus on As, Cd, Cr, Co, Cu, Mo, Ni, Pb, and Zn. Four different batch experiments were performed with both the sandy and the silty fractions of harbour sediments sampled at the disposal site for dredged material in Bremen Seehausen, north Germany. In addition to the batch experiments a modified centrifugation tube was used in order to obtain pore water from the unsaturated silty fraction. Column experiments were run with the sandy fraction of the material under saturated and unsaturated conditions, irrigated with artificial acid rain water. The results show that the legal threshold value applying to Mo and Pb is not exceeded in any of the methods applied to the sandy or the silty fractions. As for the sandy fraction, Cr and Co were also below this limit. Cd, Ni, Cu and Zn exceeded the threshold values in some of the batch experiments applied to both fractions, depending on the pH value and the elution agent used in the experiment. All results obtained from saturated column leaching were below the respective threshold values; however, it should be noted that the pH was between 7 and 8 throughout the entire experiment. This pH also applied to the unsaturated column, with the exception of the ‘first flush’. This first sample had a pH value of 3.8, which was due to sulphide oxidation at the beginning of the experiment and led to strong leaching of all the elements under study. As a consequence, arsenic, Cu and Ni values exceeded their respective threshold values.