Abstract
Mixing homogeneity and the feedstock rheological characteristic for optimal binder formulation in metal injection moulding is evaluated between Polypropylene (PP) and Sewage fat (SF) or Fat Oil Grease (FOG). Difference powder loading of SS316L also being used here to determine the possibility of the best binder formulation selected could be optimised for optimal powder loading base on rheological characteristic analysis. Two binder formulations of PP to SF being selected here are 60/40 and 70/30 accordingly with the powder loading of 60% and 55% for each binder formulation. The analysis will be base on viscosity, shear rate, temperature, activation energy, flow behaviour index and moldability index. It is found that rheological result shows all the two binder formulations with both powder loading exhibit pseudoplastic behaviour or shear thinning where the viscosity decrease with increasing shear rate. Feedstock viscosity also decrease with increasing temperature indication of suitability for moulding. Results from all the analysis conducted shows that the volumetric powder loading of 60% with binder volumetric of 60% for PP and 40% for SF contributes significant stability and suitability for optimum powder loading.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
