Abstract
Miniaturized ferrite ring patch antennas (RPAs) were designed and fabricated for multiple-input multiple-out (MIMO) applications. Design parameters of higher-order mode ferrite RPAs, 1-RPA and 2-RPA, were optimized, and antenna performance of the ferrite 1-RPA was evaluated. The Z-type hexaferrite and 2%-weight borosilicate glass composite was used for the ferrite antenna disk. The measured permeability (r) and permittivity (r) of the hexaferrite were 2.59 and 5.7, respectively, at 2.5GHz. Three-mode orthogonal radiation of the ferrite 1-RPA was experimentally conflrmed. With regard to the ferrite 2-RPA, excellent isolation (i40dB) between ports 1 and 2 was achieved at 2.5GHz. This excellent isolation property is attributed to both mode 3 orthogonal radiations of the bottom and top RPAs. The volumes of the 1- and 2-RPA were reduced to 14.5% and 34.5%, respectively, from 95cm 3 of a dielectric 2-circular patch antenna (2-CPA) volume.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
