Abstract

In this study, the microwave, i.e. 0.5–10 GHz, transmission characteristics of carbon nanofiber (CNF) with three different micrometer-scale thicknesses were experimentally investigated using a coplanar waveguide transmission line. In the experimental results, when the film of CNF was thick, the signal transmission level (S21-magnitude) was significantly lower and its phase (S21-phase) was shifted toward the low-frequency region. Based on the obtained S21-parameter (S21-magnitude and S21-phase), the electric permittivity (ε) of CNF was extracted and showed clear differences depending on the thickness, i.e., εthin = 1.20 (0.28), εmiddle = 1.84 (0.60), εthick = 6.30 (1.15) at 0.5 GHz (7.8 GHz). From the analysis of electromagnetic fields, the microwave conductivity (σmw) of CNF linearly increased with the increasing thickness, i.e., σmw/thin = 0.35 (S/m), σmw/middle = 0.58 (S/m), σmw/thick = 0.75 (S/m), due to enhanced electromagnetic field coupling between the film of CNF and the CPW line. As a result, we demonstrated that the film of CNF has a significant attenuation effect on signal transmission in the microwave regime, depending on micrometer-scale changes in film thickness.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.