Abstract
Effect of BaCu(B 2O 5) (BCB) addition on microwave dielectric properties and sintering behaviors of BaO–4.3TiO 2–0.5ZnO system (BTZ) ceramics were investigated to develop middle- k dielectric composition with low sintering temperatures. When a small amount of BCB was added to BTZ system, the sintering temperature can be lowered from 1100 °C to 900 °C due to the formation of BCB liquid phase. The system added with 7 wt% BCB was sintered at 900 °C for 2 h and ɛ r of 31, Q × f of 18,200 GHz and τ f of 3.8 ppm/°C were obtained. The suitability of BTZ ceramics for tape casting and cofiring with Ag electrodes was investigated, and no evidence of chemical reaction between Ag and ceramics was observed. The dielectric properties of the stacked multilayer plate without any electrodes were also measured. The result shows that the as-prepared BTZ ceramics are suitable for low-temperature co-fired ceramics applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.