Abstract
The relationships between coating microstructure and properties in the Cr–C–N system have been investigated as a function of composition and post-deposition annealing. Coatings of varying compositions were grown using arc-evaporation, by varying the reactive gas flow ratio fR=f(C2H4)/f(N2) from 0 to 0.2, and were found to consist primarily of the cubic δ-Cr(C,N) phase. Changes in both the unstressed lattice parameter, ao, and X-ray diffraction background intensity indicate that both the carbon concentration within the δ-phase and amorphous/crystalline content increases with fR. Increasing fR also decreases the magnitude of the compressive biaxial residual stress, from approximately 6 to 1 GPa, while increasing both the inhomogeneous stress and thermal stability. The elastic modulus and hardness of as-deposited coatings were determined from nanoindentation to be 320 and 23 GPa, respectively, for moderate carbon concentrations (fR≤0.05). Concurrent variations in microstructure and hardness with post-deposition annealing indicate that the as-deposited hardness is significantly enhanced by the microstructure, primarily by lattice defects and related stresses (microstresses) rather than average stresses (macrostresses).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have