Abstract
T91 and F82H martensitic steels were irradiated in the Swiss spallation neutron source Target-3 to a maximum dose of 11.8 dpa in a temperature range of 90–360 °C. Transmission electron microscope observations were performed to study radiation effects on the microstructure at different irradiation doses and temperatures. The results for the unirradiated and irradiated conditions indicate that there is no significant difference between the microstructures of the two steels. High-density helium bubbles of size about 1 nm are observed in samples irradiated at temperatures above about 200 °C to about 10 dpa with 550 appm He. The helium bubbles observed in T91 steel have slightly higher density but smaller size as compared to those in F82H steel at the same irradiation conditions. The density and size of defect clusters in a T91 sample are almost the same as those in a F82H sample at the same dose. In both steels, the size increases while the density drops rapidly with irradiation temperature above about 250 °C. The amorphization of M 23C 6 precipitates was observed again in T91 and F82 samples irradiated at 220 °C and below.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
