Abstract
Alumina‐matrix composites with and without SiC particulates have been produced by directed melt oxidation of a multicomponent Al alloy. In the more general case, the microstructure consists of three interpenetrating phases: the SiC preform, a continuous α‐Al2O3 matrix, and a network of unoxidized metal. The volume fraction of metal within the oxidation product decreases with increasing processing temperature, and its distribution is less uniform when a preform is present. The preform does not show evidence of degradation by the molten alloy, but the growth front tends to climb up the particles, increasing the oxidation area and enhancing the rate of composite formation. The total porosity of the composite was found to increase with increasing Mg content, processing temperature, and/or SiC particle size. Porosity within the channels is associated primarily with insufficient metal flow to feed the solidification shrinkage. Larger pores are common in the SiC composites and seem to evolve by encroachment of interparticle spaces by the convoluted growth front. Coarse chemical segregation of the heavily alloyed residual metal is pervasive regardless of the presence or characteristics of the preform, but can be significantly refined by increasing the cooling rate of the composite after growth.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
