Abstract
This study characterized the temperature-dependent constitutive parameters (yield strength, ultimate tensile strength, elastic modulus, strain hardening exponent) from the mechanical behavior of five high-temperature solders, 95Sn-5Sb, 95Pb-5In, 90Pb-10Sn, 92.5Pb-5Sn-2.5Ag, and 93Pb-3Sn-2In-2Ag, chosen such that T m > 518 K. To model appropriately their mechanical responses under high-temperature thermal cycling, where the temperatures exceed 473 K, the material’s parameters must be determined as a function of temperature. Uni-axial tensile tests were, therefore, carried out between 298 K and 473 K to determine the constitutive behavior of each solder. 95Sn-5Sb exhibited the highest strength over the temperature range tested except near 473 K. Pb-based alloys with a higher degree of solid solution (>5%) showed greater strengthening than those primarily strengthened by coarse precipitates. Additionally, microstructure changes in 90Pb-10Sn and 95Sn-5Sb were shown to be responsible for unexpected mechanical behavior at elevated temperatures.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
