Abstract
Via the method of cold sintering with post-annealing, the lead-free ceramics [Formula: see text][Formula: see text][Formula: see text]NbO3 were prepared. The cold sintered pellet without post-annealing shows a relative density ([Formula: see text] of 77.9%, which is larger than [Formula: see text] of the green pellet via the conventional solid-state sintering (SSS) method ([Formula: see text]). The cold sintered pellets were post-annealed at temperatures between [Formula: see text]C and [Formula: see text]C. The effect of post-annealing temperatures on microstructure, dielectric, ferroelectric and piezoelectric properties of the ceramics was studied in detail. After being post-annealed, the relative densities and grain sizes of the ceramics were increased. The ceramics post-annealed at [Formula: see text]C show excellent dielectric, ferroelectric and piezoelectric properties. Compared to the conventional SSS method, the method of cold sintering with post-annealing is successful in preparing dense [Formula: see text][Formula: see text][Formula: see text]NbO3 lead-free ceramics in a wide temperature range and at relatively low temperatures.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
