Microstructure and properties of polyurethanes derived from castor oil

Abstract

The goal of this work was the synthesis of novel segmented polyurethanes with a high percentage of components derived from renewable sources. The soft segment was a polyol derived from castor oil and the hard segment structure was varied by means of different chain extenders, petrochemical-based 1,4-butanediol (BD) and corn sugar-based 1,3-propanediol (PD). The synthesis was carried out in bulk and without catalyst via a two-step polymerization varying hard segment ratio. Physico-chemical, mechanical and morphological characterization was performed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), mechanical testing and termogravimetric analysis (TGA). Properties have been discussed from the viewpoint of hard/soft microdomain phase separation and also the hard segment nature and formed structure. An increase in hard segment content was accompanied by an increase in hard domain order, crystallinity, and stiffness. The hard segment structures, in addition to the elastic nature of soft segment, provide enough physical crosslink sites to impart properties ranging from elastomeric to rigid behaviour with the increase of hard segment content. Polyurethanes synthesized from bio-based chain extender showed a slightly lower crystallinity in the hard segment structure than that synthesized from BD as the chain extender. This lower crystallinity avoids strength concentrations at the soft/crystalline hard segment interface, thus improving the mechanical properties at high hard segment content. The slightly higher thermal stability observed for BD based polyurethanes is related with their more packed structures and crystallinity observed in the hard segment structure.