Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: Mechanical and thermal properties

Abstract

AbstractA series of thermoplastic polyurethane elastomers based on polycarbonate diol, 4,4′‐diphenylmethane diisocyanate and 1,4‐butanediol was synthesized in bulk by two‐step polymerization varying polycarbonate diol soft segment molecular weight and chemical structure, and also hard segment content, and their effects on the thermal and mechanical properties were investigated. Dynamic mechanical analysis termogravimetric analysis, differential scanning calorimetry, Fourier transform infrared‐attenuated total reflection spectroscopy and mechanical tests were employed to characterize the polyurethanes. Thermal and mechanical properties are discussed from the viewpoint of microphase domain separation of hard and soft segments. On one hand, an increase in soft segment length, and on the other hand an increase in the hard segment content, i.e., hard segment molecular weight, was accompanied by an increase in the microphase separation degree, hard domain order and crystallinity, and stiffness. In phase separated systems more developed reinforcing hard domain structure is observed. These hard segment structures, in addition to the elastic nature of soft segment, provide enough physical crosslink sites to have elastomeric behavior. POLYM. ENG. SCI., 2008. © 2007 Society of Plastics Engineers