Abstract
TiB2-TiC and Ti-B4C composite powders were plasma sprayed onto the 45 steel substrates, respectively, for preparing TiB2 matrix composite coatings. The microstructure and properties of as-prepared coatings were investigated comparatively. The coating prepared by plasma spraying TiB2-TiC composite powder showed the characteristics of stacking of partially melted or unmelted feedstock particles, loose microstructure, high porosity, and poor property. For Ti-B4C system, the main phase TiB2 and TiC0.3N0.7 were formed due to the reaction between Ti and B4C during the plasma spraying process. The as-prepared coating displayed dense microstructure and better quality. The properties of the coating prepared by plasma spraying Ti-B4C composite powder were much better than that of the coating prepared by TiB2-TiC composite powder.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
