Abstract
Niobium carbide has received widespread attention due to its high melting point, high strength, high chemical stability and high wear resistance, but the current preparation of niobium carbide coatings using plasma spraying technology suffers from low deposition efficiency, poor fusibility of the composite powders, high porosity, and high defects in the coating microstructure. Therefore, the microstructure and properties of NbC-Al2O3 composite coatings prepared by plasma spraying NbC-Al2O3-SiC composite powder and reactive plasma spraying Nb2O5-SiC-Al composite powder were comparatively investigated in this paper. The reaction mechanism of Nb2O5-SiC-Al composite powder during plasma spraying as well as the mechanism of the formation of coatings were analyzed in detail. The results showed that compared with the ex-situ NbC-Al2O3-SiC coating fabricated by plasma spraying, the in-situ Nb2O5-SiC-Al composite coating prepared by reactive plasma spraying had an obvious layer structure, low porosity (5.8%), high hardness (1141 HV0.1), high toughness (22.94 J/m2), and good scratch resistance properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
